Numerical study of buoyancy- and thermocapillary-driven flows in a cavity

Thermocapillary- and buoyancy-driven convection in open cavities with differentially heated endwalls is investigated by numerical solutions of the two-dimensional Navier-Stokes equations coupled with the energy equation. We studied the thermocapillary and buoyancy convection in the cavities, filled with low-Prandtl-number fluids, with two aspect-ratiosA=1 and 4, Grashof number up to 10⁵ and Reynolds number ⋎Re⋎≤10⁴. Our results show that thermocapillary can have a quite significant effect on the stability of a primarily buoyancy-driven flow, as well as on the flow structures and dynamic behavior for both additive effect (i.e., positiveRe) and opposing effect (i.e., negativeRe).     

Melnikov方法在输流管混沌运动研究中的应用

对基础简谐运动激励下两端固定输流管道的混沌运动进行了研究，推导出了系统的运动方程，确定了系统存在的平衡点及其稳定性，计算出了未扰系统的同宿轨道，并利用Melnikov方法得到了系统发生混沌运动时参数需满足的临界条件，同时还利用相平面图和：Poincare映射等方法对管道的混沌运动进行了数值模拟，通过比较发现，由Melnikov方法确定的临界参数值要稍小于数值模拟中首次观察到混沌运动时对应的临界值。     

Direct numerical simulations of two-layer viscosity-stratified flow

Two-dimensional simulations of flow instability at the interface of a two-layer, density-matched, viscosity-stratified Poiseuille flow are performed using a front-tracking/finite difference method. We present results for the small-amplitude (linear) growth rate of the instability at small to medium Reynolds number for varying thickness ratio n, viscosity ratio m, and wavenumber. We also present results for large-amplitude non-linear evolution of the interface for varying viscosity ratio and interfacial tension. For the linear case, the interfacial mode is neutrally stable for as predicted by analysis. The growth rate is proportional to Reynolds number for small Re, and increases with viscosity ratio. The growth rate also increases when the thickness of the more viscous layer is reduced. Strong non-linear behavior is observed for relatively large initial perturbation amplitude. The higher viscosity fluid is drawn out as a finger that penetrates into the lower viscosity layer. The simulated interface shape compares well with previously reported experiments. Increasing interfacial tension retards the growth rate of the interface as expected, whereas increasing the viscosity ratio enhances it. Drop formation at the small Reynolds number considered in this study is precluded by the two-dimensional nature of the calculations.     

Theoretical statistical solution and numerical simulation of heterogeneous brittle materials

The analytical stress-strain relation with heterogeneous parameters is derived for theheterogeneous brittle materials under a uniaxial extensional load, in which the distributions of theelastic modulus and the failure strength are assumed to be statistically independent. This theoreticalsolution gives an approximate estimate of the equivalent stress-strain relations for 3-D heterogeneousmaterials. In one-dimensional cases it may provide comparatively accurate results. The theoreticalsolution can help us to explain how the heterogeneity influences the mechanical behaviors, Further, anumerical approach is developed to model the non-linear behavior of three-dimensional heterogeneousbrittle materials. The lattice approach and statistical techniques are applied to simulate the initialheterogeneity of heterogeneous materials. The load increment in each loading stage is adaptivelydetermined so that the better approximation of the failure process can be realized. When the maximumtensile principal strain exceeds the failure strain, the elements are considered to be broken, which canbe carried out by replacing its Young‘s modulus with a very small value. A 3-D heterogeneous brittlematerial specimen is simulated during a full failure process. The numerical results are in good agreementwith the analytical solutions and experimental data.     

两种高分辨率数值方法计算波前有非均匀流的变截面管内激波传播规律的比较

本文采用两种对间断解具有高分辨率的数值方法基于推广Riemann问题解的二阶Godunov型有限差分法和分裂算子的随机选取法,计算了微波在波前有非均匀定常流的一维变截面管道中的传播和波后流场特征,得到一致结果,用数值模拟方法揭示了这类运动的一些特殊规律。对比两种方法的计算过程和结果,可以看出,二阶Godunov型方法明显优于随机选取法。     

Numerical Simulation of Plasma Dynamics in a Nonuniform Magnetic Field

An efficient algorithm is proposed enabling numerical simulations of plasma dynamics in a nonuniform magnetic field. The present numerical data are in good agreement with experimental data obtained in a GOL-3 setup and with previous simulations. The experimentally observed effect of fast transfer of energy to ions is confirmed. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 47, No. 1, pp. 35–45, January–February, 2006.     

基于CUDA的有限元矩阵并行装配算法研究

构建航天飞行器的结构有限元模型是准确模拟飞行仿真、完成飞行器在轨飞行阶段结构故障监测和诊断的基础。采用细长体飞行器简化梁模型，提出新的基于CUDA（Compute Unified Device Architecture）的有限元单元刚度矩阵生成和总刚度矩阵组装算法。依据梁单元矩阵的对称性，结合GPU硬件架构提出并行生成算法并进行改进。为有效减少装配时间，在装配过程中采用着色算法，提出了基于GPU（Graphics Processing Unit）共享内存的非零项组装策略，通过在不同计算平台下算例对比，验证了新算法的快速性。数值算例表明，本文算法的求解效率较高，针对一定计算规模内的模型可满足快速计算与诊断的实时性要求。     

Nonlinear stability analysis of miscible displacements

A simulator for three-dimensional horizontal miscible displacements in porous media is developed. Using this simulator, we examine the initiation and development of instabilities, viscous fingers and gravity tongues.With the only perturbations to the system being truncation and round-off errors, a density ratio (the ratio of the density of the displacing fluid to that of the displaced fluid) different from one is responsible for the initiation of the instabilities, and an unfavorable mobility ratio (the ratio of the viscosity of the displaced fluid to that of the displacing fluid) is responsible for the growth of the instabilities.     

三维有限体中平片裂纹的超奇异积分方程方法—Ⅱ.数值方法

超奇异积分方程方法的理论分析已在本文的第Ｉ部分中给出，这一部分是经的数值方法，及用此方法求解的若干典型的平片裂纹问题。     

氢氧混合气体爆轰波的真实化学反应模型数值模拟

采用高精度的ENO格式和基于基元化学反应的真实化学反应模型求解氢氧混合气体一维爆轰波的精细结构。采用直接起爆方法得到稳定传播的爆轰波 ,计算的爆轰波阵面参数和实验相当符合。对爆轰波反应区化学反应的研究表明 ,参与反应的不同组分具有不同类型的变化特征。网格尺寸影响的研究表明 ,计算结果的精度随着网格尺寸的增加而增加 ,并能保持较好的收敛性。移动网格研究结果表明 ,网格运动速度和爆轰速度接近时 ,两者的相互作用对计算结果产生一定影响。